#1
Like is it just a 3 dimensional "foot"? Like a cube that's 1 foot long, 1 foot wide, and 1 foot tall?
#2
Yes.
funkyducky


Icing happen when de puck come down, BANG, you know,
before de oder guys, nobody dere, you know.
My arm go comme ça, den de game stop den start up.

Quote by daytripper75
Get To Da Choppa!
#5
Ok so second question. 9 cubic feet... would that be a space that's 3 feet tall, 3 feet wide, and 3 feet long?
#6
Quote by WNxScythe
Ok so second question. 9 cubic feet... would that be a space that's 3 feet tall, 3 feet wide, and 3 feet long?


no, you have to multiply them, 3 times 3 is 9 times 3 is 27...or its 3 to the 3rd power....

i do believe.

i think a 1 by 1 by 1, would be 1 cubic foot....i mean think about it,

if you were adding it would be perimeter, if your multiplying into cubes, its volume

volume is found by Length x Width X Height
Last edited by SunDrop at Jul 25, 2010,
#7
Quote by WNxScythe
Ok so second question. 9 cubic feet... would that be a space that's 3 feet tall, 3 feet wide, and 3 feet long?

That's 3 square feet.
Quote by SomeoneYouKnew
You should be careful what you say. Some asshole will probably sig it.

Quote by Axelfox
Yup, a girl went up to me in my fursuit one time.

Quote by Xiaoxi
I can fap to this. Keep going.
#8
Quote by WNxScythe
Ok so second question. 9 cubic feet... would that be a space that's 3 feet tall, 3 feet wide, and 3 feet long?
9 cubic feet would be a space that's ~2.08 feet tall, ~2.08 feet wide, and ~2.08 feet long.

(~2.08 feet) cubed = 9 cubic feet.

Edit:
Quote by Jackal58
That's 3 square feet.
That's an area, not a volume. And it would be 27 cubic feet. 3 feet x 3 feet x 3 feet = 27 feet cubed.
THE OHIO STATE BUCKEYES

Drive! Drive on down the field, men of the scarlet and gray...
I'm an
Engeneer
Enginere
Engenere
I'm good with math.

a0/2 + ∑ an cos(nπx/L) + bn sin(nπx/L)

ĤΨ(x,t) = iħ ∂Ψ(x,t)/∂t
σx σp ≥ h/2
Last edited by Got Guitar? at Jul 25, 2010,
#9
9 cubic feet would be 9 cubes 1 ft x 1 ft x 1 ft stacked on top of each other...
#10
Take a square. Each length is a mile in length. That area covering that square is a square mile, because in order to work out the area of the square, you need to square it (that is, times the length by itself - so mxm). A cubic mile would be the volume of a cube, and to work out a volume of a cube, you cube a length (that is, times a length by itself twice). It's mxmxm. That's your (unit here) square and cubric (unit here) for you.
Last edited by Craigo at Jul 25, 2010,
#11
It's an uncommon disease where a person is born with perfectly squared feet. This is called 'Cubed Feet'. When a person has just one of these it is referred to as a 'Cubic Foot'
#14
Quote by Got Guitar?
9 cubic feet would be a space that's ~2.08 feet tall, ~2.08 feet wide, and ~2.08 feet long.

(~2.08 feet) cubed = 9 cubic feet.

Edit:That's an area, not a volume. And it would be 27 cubic feet. 3 feet x 3 feet x 3 feet = 27 feet cubed.


This person is correct
#15
Yes.
funkyducky


Icing happen when de puck come down, BANG, you know,
before de oder guys, nobody dere, you know.
My arm go comme ça, den de game stop den start up.

Quote by daytripper75
Get To Da Choppa!
#16
Ah yes Ok I see that makes sense now. 2x2x2 = 8. Throw in the .08 and you get 9.

Thanks!
#17
Quote by T.s.e
1 square foot = 1 foot * 1 foot
2 square feet = 2 feet * 2 feet

1 cubic foot = 1 foot * 1 foot * 1 foot
2 cubic feet = 2 feet * 2 feet * 2 feet



Utterly incorrect.
#18
Quote by T.s.e
1 square foot = 1 foot * 1 foot
4 square feet = 2 feet * 2 feet

1 cubic foot = 1 foot * 1 foot * 1 foot
8 cubic feet = 2 feet * 2 feet * 2 feet


Fixed...?
funkyducky


Icing happen when de puck come down, BANG, you know,
before de oder guys, nobody dere, you know.
My arm go comme ça, den de game stop den start up.

Quote by daytripper75
Get To Da Choppa!
#19
Quote by T.s.e
1 square foot = 1 foot * 1 foot
2 square feet = 2 feet * 2 feet

1 cubic foot = 1 foot * 1 foot * 1 foot
2 cubic feet = 2 feet * 2 feet * 2 feet

Holy shit, math fail.

Did you never learn about square numbers or are you trying to **** with the OP's head?
Current Gear:
LTD MH-400 with Gotoh GE1996T (EMG 85/60)
PRS SE Custom 24 (Suhr SSH+/SSV)
Ibanez RG3120 Prestige (Dimarzio Titans)
Squier Vintage Modified 70s Jazz V
Audient iD22 interface
Peavey Revalver 4, UAD Friedman BE100/DS40
Adam S3A monitors
Quote by Anonden
You CAN play anything with anything....but some guitars sound right for some things, and not for others. Single coils sound retarded for metal, though those who are apeshit about harpsichord probably beg to differ.