#1
Need to get rid of some guitars including this unfinished project

Bad bits first:

Paint job isn't pro or even that great, I'd recommend getting some dints filled in and resprayed.

The maple scalloped neck fits but I'm having a hard time bolting it on, I've made holes but they need to be a little deeper, I've lost interest.

No hardcase or softcase.

Good bits:

Both necks come with stock tuners

Rosewood neck bolts on fine

Solid wood body, I think it may be basswood?

Electronics work

21fret lightly scalloped board

Pearloid pickguard with H-S-S and 5 way selector

Back plate and all screws, although one edge on it is cracked.

-----------------------------------------------------------------

I am asking for £80 for the whole thing with the extra neck.
Postage would be around £25, that includes extra secure packing!

Can put all hardware back on minus the maple neck, totally upto you.
-------------------------------------------------------------------

http://img714.imageshack.us/img714/6199/img1182q.jpg


http://img213.imageshack.us/img213/5613/img1183fz.jpg

Uploaded with ImageShack.us

http://img839.imageshack.us/img839/1949/img1184y.jpg

Uploaded with ImageShack.us
My Gear:
Ibanez RG550M Dimarzio TZ + Paf Pro
Ibanez RG550R Dimarzio TZ in Bridge
Ibanez TS9>Vox AD50VT.

Quote by JackalUK
If you fap at 2 million faps per second you can go back in time
#2
£70 anyone?
My Gear:
Ibanez RG550M Dimarzio TZ + Paf Pro
Ibanez RG550R Dimarzio TZ in Bridge
Ibanez TS9>Vox AD50VT.

Quote by JackalUK
If you fap at 2 million faps per second you can go back in time