#1
I have a lil 59 in the neck and a Hot rails in the bridge, i believe the coils can be split. (i still cutrently have the stock pickup in the middle)

i was wondering if i could get it wired up so that i can have:
Position 1(fully down - Bridge) - full on hot rails
Position 2 - one coil from the Hot rails
Position 3 - one coil from hot rails one from Lil 59
Position 4 - one coil from lil 59
Position 5 (fully up - Neck) - Full on lil 59

id also like the tone pot wired only to the lil 59, so that when its in position 3 the tone pot only effects the one coil from the 59.

and id be looking to keep my Killswitch in there, while taking the tone pot from the middle pickup and the middle pickup itself out.

Hot Rails info http://www.seymourduncan.com/products/electric/stratocaster/cutting-edge/hot_rails_for_s/

Lil 59 Info http://www.seymourduncan.com/products/electric/stratocaster/cutting-edge/little_59_for_s/

its there anything id need to buy for it, my guitar is just a copy start

thanks
Gear :
strat copy (SD Hotrails in bridge, Lil' 59 in Neck)
Orange Dual Terror
Orange PPC112
Pitchblack/SHO Clone/Morley PWA wah
Last edited by blenk at Aug 7, 2010,