Problem fixed - nut was faulty on new guitar.
Last edited by ldragon-slayerl at Aug 29, 2010,
Is it the tremolo or the non-tremolo version? If it's the latter, are you sure the nut is correctly cut?

Guitars: Ibanez SV5470F, Ibanez Xpt700, Fender MIM Standard Stratocaster ('04-'05), Jackson Ps-2
Ashton AG200,
Amps: ENGL E530, Bugera 6262-212,
FX: TC Electronics G-major 2, Behringer EQ700, Morley Volume / Wah
might be somthing sharp on the nut. or like the guy before me said, the nut might not be cut correctly, causing a sharp edge or somethin
Either the nut is not right, like they said, or some frets might need to be filed smooth
If it were me id take a very fine file and just give the nut slot a bit of a smooth over just to ensure there aren't any sharp edges on the nut slot. as with all these things take your time and check your work constantly and you will be fine.
ESP M-1 - Dimarzio Super3
Ibanez RG3270 ToneZone/Blue Velvet/Paf Pro
Ibanez RG1527
Mercer Blackmachine Replica

Diezel Herbert
Diezel Einstein Combo
TC GMajor

Gain Wh0re and Diezel Mafioso