#1
well my floyd far came across a problem about a hour ago.. and im totaly lost on what to do.
when you put the floyd bar into the bridge and twist the thing to lock it is where the problem is. The bridge part where the little hole is (where u put the bar into) seems to have lifted a little and can spin around now also being super shaky.

i hope i was clear enough D:
can you repair it? do i need to replace the entire bridge?
#2
Sounds like the screw (the one that you screw the bar to) is loose. If you take a look under the trem, there's a screw under the actual screw that is loose. You need an allen key to tighten it up or loosen it. You might wanna loosen it, adjust it, then tighten it.
Hope this helps.
Jackson DK-2 [2004 MIJ] (EMG 81/SA)
Jackson RR-3 [2007 MIJ] (EMG 81/60)
Ibanez RG370DX [2009] (EMG 81/60)
Epiphone Les Paul Custom [2004] (EMG 81/85)
Ltd/Esp M-17 7-String [2013] (EMG 81-7 set)
Bugera 333XL 120watt Tube Head, Crate BV412 Cab
#3
This is an easy fix. Remove the back tremolo plate, and underneath the location of your whammy bar, there will be a cylinder with a screw on top. Tighten it with your allen key.
#4
Quote by Chaz-6(sic)6
Sounds like the screw (the one that you screw the bar to) is loose. If you take a look under the trem, there's a screw under the actual screw that is loose. You need an allen key to tighten it up or loosen it.
Hope this helps.


oh nice thanks dude. saved me you where right xD i feel stuipid.. only place i didnt check is behind the plate.
#5
Quote by Darkdevil1584
oh nice thanks dude. saved me you where right xD i feel stuipid.. only place i didnt check is behind the plate.

No problem dude, no problem.
Jackson DK-2 [2004 MIJ] (EMG 81/SA)
Jackson RR-3 [2007 MIJ] (EMG 81/60)
Ibanez RG370DX [2009] (EMG 81/60)
Epiphone Les Paul Custom [2004] (EMG 81/85)
Ltd/Esp M-17 7-String [2013] (EMG 81-7 set)
Bugera 333XL 120watt Tube Head, Crate BV412 Cab