#1
I was told by a guy at Long & McQuade that I don't really need a reverb pedal because my DD-6 can do it. I was just wondering if this is actually possible, and if so, does anyone have the settings to get that kind of sound? I've tried having the feedback higher than the effects level, and having it on 80 ms of delay.
Caution:
This post may contain my opinion and/or inaccurate information.

Current Rig:
2006 PRS CE-24
Mesa/Boogie Mark V
Voltage S212 w/ V30's
Strymon Timeline
CMATMods Signa Drive
TC Electronics Corona & Hall of Fame
#2
Set the repeat rate fast, mix/volume up a bit, and feedback as high as it goes without oscillating.
#3
Set the delay time as short as possible, then the feedback controls the reverb time.
Not all delays can go short enough to be used as a reverb though, so it might not work.
#4
This is what I have to work with. If possible, could you guys be more specific? Thanks already for letting me know what I generally have to do.
Caution:
This post may contain my opinion and/or inaccurate information.

Current Rig:
2006 PRS CE-24
Mesa/Boogie Mark V
Voltage S212 w/ V30's
Strymon Timeline
CMATMods Signa Drive
TC Electronics Corona & Hall of Fame
#5
Mode - 80ms
D.Time - all the way to the left
F.Back - set to taste
E.Level - again, set to taste
#6
Thanks phil. Going to try it now.
Caution:
This post may contain my opinion and/or inaccurate information.

Current Rig:
2006 PRS CE-24
Mesa/Boogie Mark V
Voltage S212 w/ V30's
Strymon Timeline
CMATMods Signa Drive
TC Electronics Corona & Hall of Fame
Last edited by AWACS at Aug 24, 2010,