#1
OK so i've been thinking about this recently!

I own a Boss DD20 with an external tap tempo, looking into getting a Boss DD5 too, wondered if somehow you could use one pedal to tap tempo for both?

Anyone tried this with any luck?
cheers
#2
IIRC those use 1/4" connections. If so, put a splitter jack on the end of the tap tempo box cable then use patch cables from there to connect to the two delays.

somethin like this
http://accessories.musiciansfriend.com/product/Monster-Cable-Mono-Male-to-2-Female-14-YAdapter?sku=330055
Warning: The above post may contain lethal levels of radiation, sharp objects and sexiness.
Proceed with extreme caution!
Last edited by justinb904 at Sep 3, 2010,
#3
thats great! thanks for that!
athough it seems that forever reason can't seem to get those in the UK :S
can find mono socket to 2 mono jacks but thats not as east to work with!
#5
http://www.maplin.co.uk/Module.aspx?ModuleNo=989

plug this into your tap tempo pedal, with a lead going into each pedal, I've tried it with two dd7's, it works fine.
Gear

Ibanez RG321mh
GND Strat
Laney Cub 12
Crybaby GCB-95
Boss TU-2
Digitech Bad Monkey
Marshall BB-2
EHX Little Big Muff
Joyo Ultimate Drive
SHO Clone
Boss DD-7
Boss DD-20
Boss CH-1
Daphone Volume Pedal