#1
Hey Folks!


I have just bought an used old Kramer Pacer Custom 2.


1 Schaller humbucker
2 Schaller single coils (not hum cancelling)
1 vol 2 tones
5 way switch
Coil tap


My problem is that i want to replace them with 3 DiMarzio pickups:

Air Norton S (Neck)
Super Distortion S (Middle)
D-Sonic (Bridge)


I have obtained the wiring diagram for the Pacer Custom 2 from the kramer forum:

Something like this:

http://s61.photobucket.com/albums/h8...cer_Deluxe.gif



My question is now, how do i get the 3 new pickups to fit in this new setup?

Thanks
Last edited by pajafocus at Oct 3, 2010,
#3
thanks i have seen that one but what about the two single coils? Air Norton S (Neck)
Super Distortion S (middle) which are hum cancelling? how to connect those when they have two (i think) wires out and the dimarzio have 5 wires out?
#4
That diagram shows the neck and middle pickup with two outputs each (hot and ground), and the bridge humbucker has 5 out. Are you saying that the pups you have do not have that output setup?
Marshall amplifiers are the truest purveyors of rock and roll known to man.

"And give a man an amplifier and a synthesizer, and he doesn't become whoever, you know. He doesn't become us."

Holy crap, check this out!
#5
Yes the schaller pickups have 2 wires out (hot and ground), and the 2 Dimarzios i want to put in there has 5 out.
#6
Well then I don't see why you can't use that SD diagram. It looks to have all the appropriate connections there, with the appropriate outputs from each pup. Looks the goods to me.
Marshall amplifiers are the truest purveyors of rock and roll known to man.

"And give a man an amplifier and a synthesizer, and he doesn't become whoever, you know. He doesn't become us."

Holy crap, check this out!
#7
I know but how to connect the 5 outs of the 2 new dimarzio pickups (the so called hum cancelling/rails) according to the scheme?
#8
Oh okay, I didn't read that properly. Surely you must have documentation that's come with the pups? Installation instructions?

Did you try the Dimarzio website? Cos a simple google showed me http://www.dimarzio.com//media/diagrams/G2.pdf and http://www.dimarzio.com//media/diagrams/B2.pdf which seems to be what you're after. You should be able to mix and match the wiring diagrams to get your setup. If not, have a hunt around http://www.dimarzio.com - I'm sure the answers can be found with a little bit of effort!
Marshall amplifiers are the truest purveyors of rock and roll known to man.

"And give a man an amplifier and a synthesizer, and he doesn't become whoever, you know. He doesn't become us."

Holy crap, check this out!
#9
Yeah i have seen those 2 schemes, but i will have a hunt on dimarzio , but thanks seemeel for the effort!