#1
alright so i just got my kelly case but IT DOESNT FIT!

It appears to be the the top left corner portion of the body.. (rests adjacent to your arm pit when playing)

I read to remove the felt and cut the foam but how do i start?v
My Gear:
JacksonStars KE TN-02
Jackson DK2M
Jackson WRXT
Jackson KSXT
Jackson DXMG
Jackson 7 String soloist

Ovation Celeberity
#2
how the hell can it not fit? did you not measure up before you bought it?
Belief is a beautiful armour but makes for the heaviest sword.
#3
is it just a normal case, or a custom like, MENT FOR A KELLY kind of case that jackson make.
If normal case, should have measured bro. if not, send it back and ask wtf.
ಠ_ಠ
- Yes, My name is actually Terran -
- Not just a Starcraft fan -


Terran > Zerg and Protoss
#4
Its the multi fit kelly/warrior model case.

Im just going to try and fix it instead. It appears to be a fine case just a little extra styrofoam underneath. But where do i make my cut?

Tango, we should swap SC2 fcs !
My Gear:
JacksonStars KE TN-02
Jackson DK2M
Jackson WRXT
Jackson KSXT
Jackson DXMG
Jackson 7 String soloist

Ovation Celeberity
#5
hahahahahaha possibly, I dont have SC2 with me right now, had some errors.
ANYWAYS.

Try taking a hammer, and like, hitting the area that has too much padding to possibly level it out, or lessen it in an area. may not need to cut at all.

But, if you need to cut at all, cut as little as possible, and ONLY around the area that you need. Doesn't really matter where, as long as you can get the space you need where you need it.
ಠ_ಠ
- Yes, My name is actually Terran -
- Not just a Starcraft fan -


Terran > Zerg and Protoss
#6
Yea way better idea.

I used a rubber mallet and just hammered away. Fits perfect.

ThX!
My Gear:
JacksonStars KE TN-02
Jackson DK2M
Jackson WRXT
Jackson KSXT
Jackson DXMG
Jackson 7 String soloist

Ovation Celeberity