#1
I've got an old Jazzmaster copy (probably 70's?) and I'm looking to do it up as little bit as the pickups and electronics are unusable.

I've measured up the holes in the pickguard and the pickups would need to be:

80mm x 25mm (90mm between screw holes)

Does anyone know of pickups that would fit this?
ESP LTD EC-401 White - EMG 81/60
Ibanez RG420CM

Blackstar HT-5

Artec Classic Fuzztown
Electro-Harmonix Little Big Muff
#2
Self-bump

Still haven't found a solution
ESP LTD EC-401 White - EMG 81/60
Ibanez RG420CM

Blackstar HT-5

Artec Classic Fuzztown
Electro-Harmonix Little Big Muff
#4
Here's a couple of pictures, It's been tricky identifying the guitar (as there's nothing on the headstock) but I believe it to be a Teisco Jazzmaster clone.

Hope these pictures help!

http://i.imgur.com/M785r.jpg

http://i.imgur.com/Paoax.jpg

http://i.imgur.com/lrc0e.jpg
ESP LTD EC-401 White - EMG 81/60
Ibanez RG420CM

Blackstar HT-5

Artec Classic Fuzztown
Electro-Harmonix Little Big Muff
#5
Hmm, they look pretty odd sized. Have you considered cutting a new pickguard, and putting some standard sized pickups in?
#7
I can't find any pickups that could possibly fit those holes, I'm not sure how handy I'll be at cutting a new pickguard but I guess that's my only choice.

@LeviMan_2001 I have no use for them so you can have them, send me a message with an address.
ESP LTD EC-401 White - EMG 81/60
Ibanez RG420CM

Blackstar HT-5

Artec Classic Fuzztown
Electro-Harmonix Little Big Muff