#1
Jackson DKMG neck? My neck just snapped at the first tuning peg(high e post) and split completely off the headstock, and the holes for my locking nut were drilled wrong and they are off center. I am seriously hard up for cash so any help would be greatly appreciated.
Mesa Boogie Dual Rectifier HD Multi-Watt
Marshall JCM 2000 DSL 100MLB
1960 A&B cabs
Jackson DKMG Dinky
Schecter C1+ (modded)
LTD EC-1000vb
Blueridge 160 CE
BOSS | TU-3 | DD-7
Line 6 G-50 wireless
#2
At the store

no but you could probably get something like that off of warmoth
Where's Waldo?
#4
Problem is tht it was a maple shaft and a mahogany fretboard with the weird truss rod, and plus I don't know the dimensions exactly
Mesa Boogie Dual Rectifier HD Multi-Watt
Marshall JCM 2000 DSL 100MLB
1960 A&B cabs
Jackson DKMG Dinky
Schecter C1+ (modded)
LTD EC-1000vb
Blueridge 160 CE
BOSS | TU-3 | DD-7
Line 6 G-50 wireless
#5
You sure it was a mahogany? that seems odd. and it will not need to be the same, as it is a new neck so you can use 2 completely different woods if you want (scroll down that page-it has all the options) and its classified as a Jackson neck so it should fit the neck pocket (im assuming its a bolt on)
Where's Waldo?
#6
It looks like it has a Rosewood fingerboard - or atleast GC says so

Edit: also 173 for a rosewood fingerboard.
Where's Waldo?
#7
Sounds like it's time for some Gorilla Glue.
Quote by Natrone
I'm a pretty hardcore Christian. I would like to sincerely apologize that you ran into that little fucktard


Quote by mystique facade
dale-banez made a fool of himself..lol



my gear:

oh wait, no one cares
#8
Totally meant rosewood, sorry chad... but im in quite a pissed of stupor right now as I was planning on fixing this guitar up and it's just blowing up in my face.
Mesa Boogie Dual Rectifier HD Multi-Watt
Marshall JCM 2000 DSL 100MLB
1960 A&B cabs
Jackson DKMG Dinky
Schecter C1+ (modded)
LTD EC-1000vb
Blueridge 160 CE
BOSS | TU-3 | DD-7
Line 6 G-50 wireless
#9
Quote by dale-banez
Sounds like it's time for some Gorilla Glue.


Gorilla Glue is awesome stuff man, but it wouldn't work here because it expands after it dries - which would not be very good for any part of a guitar. IDK if you were joking or not, I just don't want to give him the wrong idea.
Where's Waldo?
#10
How much do you think a good luthier would charge for a repair like this?
Mesa Boogie Dual Rectifier HD Multi-Watt
Marshall JCM 2000 DSL 100MLB
1960 A&B cabs
Jackson DKMG Dinky
Schecter C1+ (modded)
LTD EC-1000vb
Blueridge 160 CE
BOSS | TU-3 | DD-7
Line 6 G-50 wireless