ummm for the input which one is the ground and what not, there is a white wire and just a pure metal wire inside the main black one. And where do i solder on the two wires on the volume pot.
white is hot, uncoated is ground. Any uncoated wire is always ground. As for where you solder the hot lead to the volume pot, look on the Squier website for a schematic, as it will tell you.

Also, use google. Wiring diagrams for these guitars are extremely prevalent and will answer all your questions.

edit: I even did all your work for you. http://www.squierguitars.com/pdf/current/Strat/Affinity%20Strat-%20Service.pdf page 3
Last edited by hawk5211 at May 11, 2011,