#1
Okay so I know how to work the looper and after i have something recorded to the looper how do I quickly switch to the effect i wanna play over it?
Hi, you're better than me. Have a nice day!
#2
Hit the bank up switch for 4 seconds.
Looper starts up.
Hit bank down once to arm it.
Play your stuff, it automatically starts recording.
Hit bank down again to loop it.
Use any of the preset switches to change patches mid loop.
To clear the loop, hold down bank up for I think 2 seconds.
To stop it mid loop, hit bank up just once.
To record an overdub, hit bank down while the looper is playing.
To exit, hit bank up for 4 seconds.
Note: You need firmware version 2.0 for the looper.
WHich is buggy.
One bug is that the tuenr sometimes unmutes itself, at full volume. Can be quite scary.
Last edited by GS LEAD 5 at May 13, 2011,
#3
Preset so the 1 2 3 4 5? and whoah Tuner?
Hi, you're better than me. Have a nice day!
Last edited by Kilty Boxers at May 13, 2011,
#5
You saved me a lot of time and broken ears, Will you non consentually add my fb?
Hi, you're better than me. Have a nice day!
#6
What else does the RP500 have that i might not know of?!?!
Hi, you're better than me. Have a nice day!
#7
Quote by Kilty Boxers
You saved me a lot of time and broken ears, Will you non consentually add my fb?

Pm me your fb page :P
As for the RP, I say fiddle with it and read the manual. Its a basic pedal, but 8 months from buying it Im still finding out new things