#1
Hi guys, my current pedalboard is a Crybaby Original, Boss TU-3, Boss Mega Distortion, MXR Phase 90, Big Muff Pi, TS9. I was wondering which pedals can be daisy chained and which can't. I've searched and found out some stuff about polarity that I don't quite understand, it looks like everything is fine except the big muff?
Reaching out to embrace the random,
Reaching out to embrace whatever may come.
#2
All of them can be daisy chained as long as

1. You have a powersupply that provides enough current for each pedal. I'd reccomend getting one that provides twice the required amount for some headroom, 1.5A or 1500mA should be enough.
2. All your pedals are either postive ground or negative ground, all yours are negative ground, you'll only really find postive ground on older circuits. You should be good to go.
3. If its the big box muff, you'll need a 2.1DC -> 1/8" converter.
http://www.dv247.com/studio-equipment/visual-sound-3-5mm-converter-%282%29--49274
4. All your pedals are the same polarity, (center negative), im almost postive they all are, if not you can get a adapter to reverse polarity.
http://www.dv247.com/studio-equipment/visual-sound-1-spot-reverse-polarity-convertor--49277
#3
got it, so I want a 9v wall adapter that's stronger, a daisy chain, and that little adapter. Thanks!
Reaching out to embrace the random,
Reaching out to embrace whatever may come.