#1
I dont know if this counts as double posting.. I hope not.

Long story short.. I purchased seymour duncans that were drilled for direct mount.

The answer im finding now is to

1. find nuts/washers that fit the humbucker screw. (home depot)
2. solder the nut to the bottom? of the duncans baseplate
3. washer goes on top?

I hope someones had experience with this and can help me.. a sh-2n and tb-4 hang in the balance!
My Gear:
JacksonStars KE TN-02
Jackson DK2M
Jackson WRXT
Jackson KSXT
Jackson DXMG
Jackson 7 String soloist

Ovation Celeberity
#3
The nuts are so i can use the original screw cause the hole in the pickups baseplate is to large.
My Gear:
JacksonStars KE TN-02
Jackson DK2M
Jackson WRXT
Jackson KSXT
Jackson DXMG
Jackson 7 String soloist

Ovation Celeberity