#1
Alright so Im almost finished with installing my 2 Duncan Humbuckers (first time installing PUs)

QUESTIONS:
1. The Duncan Wiring Diagram has "ground wire from bridge" going to my tone pot(with the capicator). Is this the grounding wire underneath my bridge PU ?

2. I also have grounding wires under my neck PU and my floyd rose claw. They get soldered into the grounding station (screw)?

3. Is there a grounding wire for my 3 way switch?

Im refering to this diagram via the Duncan Website:
http://www.seymourduncan.com/suppor...tic=2h_1v_1t_3w

any help would be greatly appreciated
My Gear:
JacksonStars KE TN-02
Jackson DK2M
Jackson WRXT
Jackson KSXT
Jackson DXMG
Jackson 7 String soloist

Ovation Celeberity
#3
the duncan diagram i have has no grounding wire on the volume pot.

It has the bridge going to the tone pot
My Gear:
JacksonStars KE TN-02
Jackson DK2M
Jackson WRXT
Jackson KSXT
Jackson DXMG
Jackson 7 String soloist

Ovation Celeberity
#4
Well, the link you posted did work. But if you wire it up correctly, and change it so you have your main grounding wire coming off your volume pot going to your bridge, you'll be fine.

Everything grounds to the volume pot anyways, since it's the volume pot, it controls everything.