I pieced a diagram together today that would incorporate 6 switches, 3 DPDT (on/on) and 3 SPDT (on/off/on). The idea is to have a 3 Humbucker guitar that has 3 separate on/off switches and 3 switches to coil split the Humbuckers as follows North Coil/Humbucker/South Coil.


This is my rough draft, essentially, but I don't know enough about wiring to guarantee it would successfully do what it's intended to do. All I really need to know is if it would work and if it doesn't work how can I fix the diagram to make it work.

Also please feel free to add any constructive criticism on the diagram, and where it says "To volume Pot" it means the left most of the 3 prongs on the pot.