#1
Hi UG this is my first post.

I have a cheap electric guitar that i want to customize,getting a new one soon (mostly for metal) so i want my old one to sound totally different.

I basically don't know much about guitar parts and stuff.
I was thinking about getting new mic's and maybe a new neck.

Is it hard too change the mic's and neck? i want to learn to customize my guitar even if i destroy my guitar.

any ideas? recommend me some parts and maybe tools if needed that aren't too expensive i guess i can find a lot on ebay?

ps. sorry for my english its not my primary language
#2
Quote by pirateking22
I was thinking about getting new mic's

Quote by SteveHouse
This thread is officially about sucking Sleaze off for a sig.


Quote by tayroar
Hey Sleaze I'll give you a blowjob if you sig me. Maybe even some nudey photos?


Quote by crazy8rgood


Sleaze, that made me lulz in my pants.


Quote by 36mikeyb36
hahaha Sleaze i'd give you my mom for that one.
#3
Quote by Sleaze Disease


dude plz he says his english is bad
so please think: What does a microphone with a voice??
So he means something that does the same for a guitar?
HE MEANS PICKUPS!
#4
Quote by pirateking22
Hi UG this is my first post.

I have a cheap electric guitar that i want to customize,getting a new one soon (mostly for metal) so i want my old one to sound totally different.
What kind of sound specifically?
I basically don't know much about guitar parts and stuff.
I was thinking about getting new mic's and maybe a new neck.

Is it hard too change the mic's and neck? i want to learn to customize my guitar even if i destroy my guitar.
Assuming you mean pickups then it's pretty easy, just make sure you get the right size (single coil, humbucker, P90 etc...). Necks are harder to buy because you need to get the scale length right, the neck pocket size, nut width and all that right.
any ideas? recommend me some parts and maybe tools if needed that aren't too expensive i guess i can find a lot on ebay?
If the guitar is cheap it might benefit from some new tuners and a new bridge aswell, dunno if you had considered that but it usually makes a big difference to tuning stability. Ebay is a decent enough place to get parts and tools but make sure you don't replace bad, cheap parts with bad, cheap parts. You'll only really need a soldering iron, solder and some scredrivers for what you were originally planning.
ps. sorry for my english its not my primary language

So yeah, that's it from me
Ben

GEAR:
Squier Vintage Modified Telecaster Deluxe
Squier Vintage Modified Jaguar
Blackstar ht-5 head
Blackstar ht-408 cab
Landola V72 Acoustic
Seymour Duncan Woody SC

Quote by lolometer1
Wanna be sex buddies?
Quote by housemd
nope.
#5
Quote by Headphonehead
dude plz he says his english is bad
so please think: What does a microphone with a voice??
So he means something that does the same for a guitar?
HE MEANS PICKUPS!

His English isn't bad at all, re-read his post.
Quote by SteveHouse
This thread is officially about sucking Sleaze off for a sig.


Quote by tayroar
Hey Sleaze I'll give you a blowjob if you sig me. Maybe even some nudey photos?


Quote by crazy8rgood


Sleaze, that made me lulz in my pants.


Quote by 36mikeyb36
hahaha Sleaze i'd give you my mom for that one.
#6
haha i obliviously ment pickups not mics :P

i have singelcoils btw.
Last edited by pirateking22 at Jun 19, 2011,
#7
Which country are you in?

It's hard to recommend specific parts and places to get them unless we know where you are.
LOOK

Call me Neutral.
Quote by da_
I wonder if you get more out put if you wire a battery to your penis.