#1
Subject is here.

Does anyone have demos of this devices (guitar>amp>rec software)?
I don't care if you play bad, I just want to hear how does it sound?
I know that cleans is pretty good, so how about hi-gain? Does it sounds flat?
And I know there's many demos on youtube - if they all fit, then why should I ask it here?

Thanks!


Ps: sorry for bad english-not native for me.
#3
I'll get around to posting some recordings of the rp355 in sound cloud in a couple days. I'll pm you the links.
Guitars: Fender FSR Standard Strat, Squire Affinity Strat, Epiphone Nighthawk
Amps: Vox AC15C1, Roland Cube 15x, Peavey KB-1
Pedals: Digitech RP355, HD500, Joyo AC-Tone, EHX Soul Food
#4
The RP500 has pretty much the same processor engine and amps as the 355. You can check out my profile and my posted MP3's, all done with the 500. Some use a Mesa triple rect, others use an emulated Marshall JCM2000.

Not the greatest recordings, but you'll get the idea. I loves me my Digitech MFx!
#6
Well, thank you guys! I found out that it's realy flat... Not "digital", but really flat.. Where's the goddamn bass of the signal?
#8
Quote by GS LEAD 5
^Cause tere aint no bass guitar now you know what bassists do

Sorta catchy joke, but I mean bass in EQ.
#9
The only reason youll hear such low end is if youre playing a guitar at high volume or if you ahve a loud bassist.

Amps do NOT put out lots of low end. Espec tight metal oriented ones. Play a vintage voiced amp through an open back cab youll get lots of loose bass. Play through an Orange closed back with V30's, bass is much tighter.

Oh, and if you scoop your mids but that sounds terrible in a mix.
#11
Have you ever turned "bass" on your amp from 1 to 10 (9)? What did you hear? Any changes?

That's what I'm talking about.
#13
Just turn up the bass on the unit.
Guitars: Fender FSR Standard Strat, Squire Affinity Strat, Epiphone Nighthawk
Amps: Vox AC15C1, Roland Cube 15x, Peavey KB-1
Pedals: Digitech RP355, HD500, Joyo AC-Tone, EHX Soul Food
#15
Sorry, I can't figure out how to record my rp355.
Guitars: Fender FSR Standard Strat, Squire Affinity Strat, Epiphone Nighthawk
Amps: Vox AC15C1, Roland Cube 15x, Peavey KB-1
Pedals: Digitech RP355, HD500, Joyo AC-Tone, EHX Soul Food
#17
Well, I think you need to connect it via USB then in recording software you need to select unit.
It's just my supposition.
#18
I think you have heard enough demos. Just get it. You won't be disappointed.
Guitars: Fender FSR Standard Strat, Squire Affinity Strat, Epiphone Nighthawk
Amps: Vox AC15C1, Roland Cube 15x, Peavey KB-1
Pedals: Digitech RP355, HD500, Joyo AC-Tone, EHX Soul Food
#20
Oh, well you won't need any more demos.
Guitars: Fender FSR Standard Strat, Squire Affinity Strat, Epiphone Nighthawk
Amps: Vox AC15C1, Roland Cube 15x, Peavey KB-1
Pedals: Digitech RP355, HD500, Joyo AC-Tone, EHX Soul Food
#22
Yeah, HNOD!
Guitars: Fender FSR Standard Strat, Squire Affinity Strat, Epiphone Nighthawk
Amps: Vox AC15C1, Roland Cube 15x, Peavey KB-1
Pedals: Digitech RP355, HD500, Joyo AC-Tone, EHX Soul Food
#23
Well, I got it. And I forget about power supply. I've got different voltage standarts (eu).. It's seems like I need ps0913 b 230.. But I can't find original (Harman pro) supply anywhere.. Can I use not the original power supply, from other brand?

Question 2: Will rp355 switch on without sound cables put in (with just power supply)? Can I test it in store, or I also need to bring guitar cables to test it?

Thank you!
#24
All that matters on the power supply is the input/output voltage, amp capacity, AC or DC, connector size, and if DC the connector polarity. If your other power supply meets the specs then you can use it.

I'm pretty sure it will switch on without an input cable.
#25
Well, original power supply input is 120v, when my country input is 220v..