#1
My pedals are...

Boss TU-2
Boss NS-2
Boss DD-3
Line 6 M5
Reverb

Should the NS-2 be in the fx loop or in the front of amp with the tuner?

Peavey 6505+
Les Paul Custom Silverburst

Tool 5/5/06
Tool 11/24/07
Tool 12/8/07
RHCP 4/28/07
RAtM 4/29/07
Black Label Society 3/7/09
Black Label Society 5/4/09
Metallica 12/7/09
Alice in Chains 2/8/10
Lamb of God 7/14/10
#3
depends if your trying to kill amp noise or feedback from guitar etc. amp noise, the ns2 goes in the loop, otherwise, upfront. or you can run it in the x-connection configuration to do the job of both upfront and in the loop. this can cause tonal issues, allbeit very slight ones. i run an ns2 in the loop of my 6505 112 combo and a rocktron hush up front to kill the feedback issues. :-)

Chapman ML2 x 2
Dean Razorback Slime Bumblebee
Gibson Les Paul Studio
Epi Les Paul Custom (EMG 81/85)
ESP Ltd EC-256 (SH4jb/SH2n)
Jackson DKMG (EMG 81/60)
Epi SG Iommi
Squier Classic Vibes 50's Tele
Ovation MT-37
Peavey 6505+ 112
#4
^ +1, x-pattern
I'm an idiot and I accidentally clicked the "Remove all subscriptions" button. If it seems like I'm ignoring you, I'm not, I'm just no longer subscribed to the thread. If you quote me or do the @user thing at me, hopefully it'll notify me through my notifications and I'll get back to you.
Quote by K33nbl4d3
I'll have to put the Classic T models on my to-try list. Shame the finish options there are Anachronism Gold, Nuclear Waste and Aged Clown, because in principle the plaintop is right up my alley.

Quote by K33nbl4d3
Presumably because the CCF (Combined Corksniffing Forces) of MLP and Gibson forums would rise up against them, plunging the land into war.

Quote by T00DEEPBLUE
Et tu, br00tz?
#5
Whilst on this topic, I'm thinking of buying a delay pedal next week. Considering I have a noise suppressor already it wouldn't be a good idea to fit the delay along with it in the same chain?

My guess is that the delay pedal should be ran through the effects loop and the NS at the front of my amp? Correct?

Another question. If I was to buy a second NS to kill amp hiss and place it in the effects loop would that effect the delay pedal in any way?

Sorry don't mean to be thread jacking!
Gear
Bugera 6262 Head
Harley Benton G212 Vintage
Ibanez RGA 121 Prestige
ESP LTD DJ600
Fender USA Stratecaster
Maxon O808
TC Electronic Flashback Delay
ISP Decimator
MXR 10 Band EQ
Boss T-U3 Tuner Pedal
#6
i *think* you only need the one NS2 if you use the x-pattern connection. if you're gonna buy two, just consider getting the decimator g-string, as it'd probably be a similar price (and while i haven't tried the g-string, the bog standard decimator is a better gate than the ns2, imo).

I would put the delay after the gate, too. the gate can chop off the delays when they drop below the gate threshold.
I'm an idiot and I accidentally clicked the "Remove all subscriptions" button. If it seems like I'm ignoring you, I'm not, I'm just no longer subscribed to the thread. If you quote me or do the @user thing at me, hopefully it'll notify me through my notifications and I'll get back to you.
Quote by K33nbl4d3
I'll have to put the Classic T models on my to-try list. Shame the finish options there are Anachronism Gold, Nuclear Waste and Aged Clown, because in principle the plaintop is right up my alley.

Quote by K33nbl4d3
Presumably because the CCF (Combined Corksniffing Forces) of MLP and Gibson forums would rise up against them, plunging the land into war.

Quote by T00DEEPBLUE
Et tu, br00tz?