#1
okay so i've got a dean razorback db floyd, its a piece of shit that would probably serve better as firewood than a guitar, but its all of got at the moment...


the neck on this thing is loose as hell and will not tighten. its tight against the neck joint opposite the neck plate but it the entire neck rotates in the neck joint if you push down or pull up on it. this of course knocks it extremely out of tune and ****s the intonation up.


ive even filled the screw holes in the neck and still its extremely loose.


could i just unscrew the neck, squirt a bunch of wood glue in between it and the neck joint, and then tighten the screws back down to do a sort of makeshift set neck?