I bought a Martin OM neck from ebay, and I'm ready to install the fretboard and truss rod. I checked Stewmac for a Martin style truss rod but its is quite a bit wider than the channel routed in the neck. Does anyone know what truss rod would fit this neck?
aren't they all standard?
That's what I thought too. The one's from stewmac are 7/16" or 11mm the OM neck channel is only about 9mm. If I have to route a wider channel, I can but I was hoping for just an easy install so I don't screw anything up
Last edited by sirgreggins at Jul 9, 2011,