#1
Hey guys, I accidentley knocked the wire off the speakers in my 212 combo (they were held on by rubber clasps?). Basically the - points on both amps are still connected together, but the + wires that go to the chassis have come off, do I just need to stick one wire onto each + point on the speaker? Or do I connect both wires from the chassis to the - and + of one speaker? The load should be 16 Ohms and the speakers are 8 Ohms each.
Gear:

Gibson 2005 Les Paul Standard
Fender Road Worn Strat w/ Noiseless pickups
Marshall JCM 2000 401C
Marshall Vintage Modern 2266
Marshall 1960A cab (Dave Hill from Slade's old cab)
Ibanez TS9DX
EHX Little Big Muff
Freshman Acoustic
Last edited by ProphetToJables at Sep 4, 2011,
#2
The speakers must go in series like this:

Sleeve contact on the jack --- Minus tap of the 1st speaker
Hot contact of the jack --- Plus tap of the 2nd speaker
Plus tap of the 1st speaker --- Minus tap of the 2nd.

Which one is first and which is second doesn't matter - chose for shorter wires if possible.