#1
Hey guys,

So I recently bought a Seymour Duncan PhatCat and a '59, but the pickup wires were cut wayyyy too short. I've been looking at wiring diagrams on SD's website, so I know which connections to solder, but the wires don't have a chance of reaching where they need to go. I'm a complete noob and this will be my first wiring job besides EMG solderless. How can I extend the wires?
Attachments:
Photo on 2011-10-24 at 17.53.jpg
Photo on 2011-10-24 at 17.47 #2.jpg
Last edited by thirdykal at Oct 24, 2011,
#2
You could strip the wires that you have now on the ends and solder more wire too it, but if you 're going to do that you might as well just replace the wire all together so your jobs not so patchy. :s
#4
Send the pickup back and say that there was no wire with it.
#6
Quote by Buxom
Send the pickup back and say that there was no wire with it.

Profit ^ lolol
I hate sanding