#1
I have a licensed Floyd Rose (don't really like it), and the base for the whammy bar wobbles, like as if it is loose in the slot. Is it as simple as taking the bridge out and tightening a screw, or is it something more serious?
#2
A new tremolo arm should fix the problem
I'm not a James Hetfield fan
My username is "hames jetfield" because "farty mriedman" sounds weird.

Quote by laid-to-waste
i have rabies from licking my pet rat's face


Jackson DK2M
Digitech RP255
Vox DA5
Casio CTK-6000
#3
Also take off the back plate and check the allen screw is tight, it sits directly below where the arm goes in but you get it from underneath.
#4
^^ that

flip the guitar over. take off the plastic cover on the back. get a 3mm allen key and tighten the screw on the trem insert sleeve.
Last edited by rebar71 at Oct 29, 2011,
#5
Yeah I figured that it was the base for it, and just had to be tightened on the underside of the bridge. Thanks everyone.