#1
If my amp only has one extenstion out and my speaker cabinet has two inputs, could I use a Y cable to split the signal to my cabinet? If not, what will happen if I try?
:
"Stop shooting me!!!GAHHHH!!!"
<(0_0<(>0_0)> FU
^(0_0)^^(0_0)^ Sion
(>0_0)><(0_0< HA!!!
<(*~*)>
#3
you dont need to
the two inputs in the cab are so you can use the cab in stereo
using a y splitter wont do anything it will sound the same as pluggin in one cable from the amp to the speakers
#4
I had a pretty long post typed out here, but I think the short version will do you better:

Unless you have a stereo-cab that can't be switched to mono, a y-cable is completely pointless.
#5
Yea it works in mono, I just din't want to try something and potentially essplode my amp just to see what something would do. Will it be louder or will it just be the same (which isn't a problem, I just don't want to break anything)?
:
"Stop shooting me!!!GAHHHH!!!"
<(0_0<(>0_0)> FU
^(0_0)^^(0_0)^ Sion
(>0_0)><(0_0< HA!!!
<(*~*)>
#6
it would be exactly the same.

also you probably can't even do it

actually just don't do it.
Jumping on dat gear sig train.
PRS Hollowbody II / BKP Warpigs
Strandberg OS6T / BKP Aftermath
Strandberg OS7 / Lace Poopsticks
Skervesen Raptor 7FF / BKP Warpigs
Skervesen Raptor 6 NTB / BKP Juggernauts
Hapas Sludge 7 FF / Hapas Leviathan
Anderson Baritom / Motorcity Nuke BKP Sinner Anderson H2+
Warmoth Baritone / BKP Piledriver
Ibanez Rg2120x / BKP Nailbomb

Blackstar ID:Core Beam