#1
I'm installing EMG 81 -85 active solder less connection pickups into a LP style body. Is there a pickup 3 way toggle switch the works with the solder less kit?
#2
I have looked high and low for one, but came up empty. Your best option (what I did) is to salvage the toggle you have now with the wires still attached. Strip the ends of the wires and put them in the corresponding ports on the EMG Buss and tighten the screws to lock them in. If you already tore the wires off, or don't have one, soldering 4 wires to a switch is not as scary as it sounds.
#3
The EMG solderless kit is designed to use the toggle switch you have now with the wires still attached. Strip the ends of the wires that are not attached to the toggle switch and put them in the corresponding ports on the EMG Buss and tighten the screws to lock them in.