#1
When my amp's gain gets turned up past about 5 or 6, the gain starts to fuzz up a little. Also, my midrange control is more of a low mid than a "mid" control. So what I want to do is give it a little extra "push" and tighten the sound up. Would a tubescreamer do the job? Or is there something better for it then that? (play style is rock and metal of all styles, though I prefer thrash)
ESP/LTD F-50
1989 Kramer Showster
Rogue RADH Acoustic
Fender CD-60 Acoustic
Washburn XB-100 4 string
Peavey Millenium AC BXP
Fender Rumble 150
Crate BV60H Head
Crate BV412 Cab
Vox AD15VT
#2
Sounds like you want a tubescreamer and an EQ pedal. Does your amp have an FX loop?
Spin 'round carousel when your horse isn't screwed in.

My band:
Fractured Instinct
(For fans of Death/Groove/Prog Metal)

Ibanez RGA42E
Ibanez S420
LTD H-301
Ibanez RG520
Peavey Predator USA
Douglas Grendel 725
Line 6 Pod HD500X
#4
Okay. I was thinking of an EQ as well, but can't afford the OD and the MXR eq. I've seen Danelectro makes a 7 band eq for around $30.... Is it any good?
ESP/LTD F-50
1989 Kramer Showster
Rogue RADH Acoustic
Fender CD-60 Acoustic
Washburn XB-100 4 string
Peavey Millenium AC BXP
Fender Rumble 150
Crate BV60H Head
Crate BV412 Cab
Vox AD15VT
#5
Quote by ThrashMetal014
Okay. I was thinking of an EQ as well, but can't afford the OD and the MXR eq. I've seen Danelectro makes a 7 band eq for around $30.... Is it any good?


your probably better off just doing the mxr 10band eq. you can do everything u need with it to tighten up your sound and u can use it like a tube screamer and just boost the level to get the tube screamer like effect. that way you can tighten up your sound and use the level and gain sliders on it to boost the signal