#1
Quick rundown of how i build pedals here.

Start with an enclosure:



Slap a template on it with tape:



Head into the drilling shed:



Come out with this:



Head back inside with a couple of others i did at the same time..



Start filling them with hardware:



Decide what pedal to build (rangemaster with range toggle), Solder and wire the circuit in!



Done:



all there is to it. took me an hour
mojostompboxes.com
#3
Quote by \m/slipknot\m/
how do you know what configuration of parts will make what effect? Is the a site with instructions?

yeah man, i think you must have left out at least 9000 hours of trial and error

Quote by emad
jthm_guitarist
Warned for trolling!


Quote by metal4eva_22
Didn't you say that you had a stuffed fox that you would occasionally fuck?

Quote by Axelfox
It's not a fox,it's a wolf.
#8
Quote by kurtlives91
Can you explain how the circuits you build work?


the feedback resistor controls the gain.
Jumping on dat gear sig train.
PRS Hollowbody II / BKP Warpigs
Strandberg OS6T / BKP Aftermath
Strandberg OS7 / Lace Poopsticks
Skervesen Raptor 7FF / BKP Warpigs
Skervesen Raptor 6 NTB / BKP Juggernauts
Hapas Sludge 7 FF / Hapas Leviathan
Anderson Baritom / Motorcity Nuke BKP Sinner Anderson H2+
Warmoth Baritone / BKP Piledriver
Ibanez Rg2120x / BKP Nailbomb

Blackstar ID:Core Beam
#9
Quote by \m/slipknot\m/
how do you know what configuration of parts will make what effect? Is the a site with instructions? nice build btw, I like the raw metal look. Now you just need a logo on it and your set.


I think if you do a google search of the words "free" "stomp" and "boxes" you would be getting off to a good start.
Was lacking a decent sig. Still is.
#11
Where do you get your boxes made and templates.
Running through:

Engl Fireball
Engl Slanted Cab
Ibanez Xiphos
Schecter C-1 FR Black
Ibanez GRG (on its way)

Pedals:
Boss Noise Gate, Zakk Wylde Overdrive, Boss Tuner, Zakk Wylde Wah.
#13
Quote by Leon987
What program did you use to design this?


It was probably drawn in Visio. Any vector based design program would work, even google sketch.
#14
Quote by kurtlives91
So are you IvIark or you just use his layouts for your pedals?


the latter.
mojostompboxes.com
#15
man where has iv been lately.
Jumping on dat gear sig train.
PRS Hollowbody II / BKP Warpigs
Strandberg OS6T / BKP Aftermath
Strandberg OS7 / Lace Poopsticks
Skervesen Raptor 7FF / BKP Warpigs
Skervesen Raptor 6 NTB / BKP Juggernauts
Hapas Sludge 7 FF / Hapas Leviathan
Anderson Baritom / Motorcity Nuke BKP Sinner Anderson H2+
Warmoth Baritone / BKP Piledriver
Ibanez Rg2120x / BKP Nailbomb

Blackstar ID:Core Beam
#16
wow. impressed. checking out your site now. that is some clean wiring.