#1
Feel free to just link me to an article, but I haven't been able to find my solution.

My build is an HSH, and the S is taken care of. On the 2 H's, I've got 5 wires (RWBGbare). I seem to be able to set them up where either the sound is really thin (doesn't sound like a humbucker) or where the sound is nice in positions 1&5 but 2&4 are bad.

Ultimately, I am trying to find out which wires are soldered together, which go to the switch and which go to the volume pot ground. My goal is to be noiseless and have this configuration on the switch:
1 = Bridge H
2 = Bridge S & Middle S
3 = Middle S
4 = Neck S & Middle S
5 = Neck H