gregislegend
Registered User
Join date: Nov 2012
111 IQ
#1
So the Vox AC15 is the first tube amp I've ever owned so I'm hoping the solution is something really obvious that I'm missing. My problem is this:
I want to get some natural distortion out of the amplifier... nothing crazy... and for the most part I'm usually successful... however it only sounds good when I'm not standing directly in front of it. In fact, it usually sounds VERY good when It's not pointed at me, but when it is, it's incredibly shrill and ear piercing. I've been very frustrated and at my wits end trying to get it to sound consistent. I'm afraid that it's going to sound awful to anyone in the crowd who happens to be standing in front of it. Does anyone have a solution? I should mention that it sits on a stand angled upward. This is the guitar I play [forbidden link]

Please, for the love of god, if anyone has any input I'd be incredibly greatful.
RMB
Yiihaaa!!!
Join date: May 2009
1,082 IQ
#2
EQ some treble out, or add some bass.

Also: It might be that this ear piercing loudness has to do with the room you are in, try the amp with the same settings outside.

Also nr2: When playing live you have a group of humans standing there, every single one of them absorbs a lot of treble sound (except if an iron terminator is checking you out) so you hear less treble live.
Mesa/Boogie Road King v1
Marshall JMP 2203 '78
Vox AC30 H2 Heritage HW
Fender Deluxe Reverb '65 RI
Gibson Les Paul Custom '57 Historic RI '05
Fender American Vintage '52 RI Telecaster '02
Fender American Vintage '62 RI Stratocaster '07
gregislegend
Registered User
Join date: Nov 2012
111 IQ
#3
Oh that's really interesting. Another concern I had was that such an unpleasant sound would somehow be bad for it. Is it safe to just sort of point it away from people when I play it? Because it does actually sound really really good when it's not pointed at anything.
Robbgnarly
Tab Contributor
Join date: Feb 2011
1,177 IQ
#4
what speaker is in it? a speaker that is less icepicky might be the answer
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
gregislegend
Registered User
Join date: Nov 2012
111 IQ
#5
Hmm, It's just the stock speaker. I also just read about this mod that involves snipping the bright cap. Anyone have any experience with that?
Dave_Mc
Chirp and Swirl
Join date: Mar 2005
2,967 IQ
#6
Quote by Robbgnarly
what speaker is in it? a speaker that is less icepicky might be the answer


+1. or even break in the stock one if it's not broken-in already.

or you could even try weber beam blockers or something like that (never tried them, no idea how good they are).
Quote by classicrocker01
Only on UG would I say I got engaged and bought a jet city and get congratulated on the amp


gregislegend
Registered User
Join date: Nov 2012
111 IQ
#8
haha yeah. I've been searching high and low for answers although I think I'm going to attempt the bright cap mod tomorrow.
Kevin Saale
Talks to empty chairs
Join date: Dec 2007
1,339 IQ
#9
How old is it? That sounds very much like an unbroken in speaker. A little mod that helps is to put like 5-10 layers of duct tape on the grille directly over the center of the cone of the speaker. Use gaffers/painters tape for the first layer so it comes off easily. It won't be a huge difference, but it will cut down on some of the 'beaminess' of the treble.
I don't give a shit if you listen to me or not
gumbilicious
beginner
Join date: Oct 2007
1,236 IQ
#10
try putting tape on the grill near the center of the cone. acts as a diffuser.
punk isn't dead, it's always smelled that way.

"A perfection of means, and confusion of aims, seems to be our main problem."
-ae