#1
Need some help with diagrams for a guitar...

It has a piezo under the saddle of the bridge (it's a semi-hollow resonator) and a mini humbucker in the neck, one volume pot, one tone pot, and a blend pot for blending the piezo and humbucker. I've also thrown in two DPDT on/on switches to use one as a killswitch (to cut the signal altogether) and the other as a coil tap for the humbucker.

Below is an image of the guitar with the components in place...
http://i1338.photobucket.com/albums/o692/lukemarsh1/Res.png

I just need help assembling a final wiring diagram for these functions.

Cheers!
Last edited by loop-de-luke at Nov 20, 2012,