#1
Does anyone know the part number or model number for the Grover tuners on the Epi Explorer? Having a hard time due to different names (Mid-size, Mini, etc.) part numbers and lack of specs.
Need chrome or nickle for a 2005 Korean model Explorer.

Thanks,
#2
You could always pull one out and measure it with a pair of calipers.
I pride myself on my humility.
#3
You should upgrade to locking tuners. The Grover Rotomatics have a 16:1 ratio, these Planet Waves tuners are 18:1.

http://www.planetwaves.com/pwProductDetail.Page?ActiveID=4115&productid=513&productname=Auto_Trim_Tuning_Machines_6_in_line

I replaced the Grovers on my Gibson SG, and my Epi SG with the Planet Waves. The greater tuning precision, stability and speed of restringing is worth it - especially since they are priced so close the the cost of the Grovers.
#4
Quote by mtshark
You could always pull one out and measure it with a pair of calipers.


And then compare those measurements to what?
#5
You need Grover Mini Rotomatics.
Without the "mini" you have tuner buttond as big as on the Epiphone Flying V.
Mesa/Boogie Road King v1
Marshall JMP 2203 '78
Vox AC30 H2 Heritage HW
Fender Deluxe Reverb '65 RI
Gibson Les Paul Custom '57 Historic RI '05
Fender American Vintage '52 RI Telecaster '02
Fender American Vintage '62 RI Stratocaster '07
#6
Grover Mini Rotomatics:

Gilchrist custom
Yamaha SBG500
Telecasters
Randall RM100 & RM20
Marshall JTM45 clone
Marshall JCM900 4102 (modded)
Marshall 18W clone
Fender 5F1 Champ clone
Atomic Amplifire
Marshall 1960A
Boss GT-100


Cathbard Amplification
My band
#7
Wrong tab angle.

Ordered the 406's, I'll let you know if they work (if anyone cares.)
#8
Btw, that diagram was from StewMac. Great resource for tuner specs.
Gilchrist custom
Yamaha SBG500
Telecasters
Randall RM100 & RM20
Marshall JTM45 clone
Marshall JCM900 4102 (modded)
Marshall 18W clone
Fender 5F1 Champ clone
Atomic Amplifire
Marshall 1960A
Boss GT-100


Cathbard Amplification
My band
#9
Unless you want Grover part numbers (they only have their own.) BTW.


The Grover 406 series are an exact replacement and the locking units work well.
Don't know if they still make the non-locking version.
You are on your own trying to figure out what Stewd Mack has.
Last edited by TVeye at Feb 7, 2013,