I have a four string Ibanez Soundgear and I need new strings. I don't know much about strings. So I need help.

I play chords on my bass, not really any actual bassline stuff. So I use a capo and play three note chords above the 12th fret mostly on the A D and G strings. My aim, obscure as it may be, is to create a sound as close to an acoustic guitar as possible. What I need help with is picking the right strings for the job.

If I'm posting this in the wrong place or whatever let me know.

perhaps a thinner gauge will benefit you? i'll look into other ideas though
bare in mind i have pretty much no experience in playing bass as an acoustic guitar. i would suggest playing near the bridge perhaps with a pick, while using the neck pickup. roll off the bass slightly and slightly up the high mids. maybe some very slight reverb?
Last edited by moody git at Feb 5, 2013,
I've got the pickup and amp settings down, but it feels like I'm confined to a somewhat flat bass tone. I know this has a lot to do with my strings being really old, but before I get new strings, I want to learn exactly the differences between the variations of strings.
so why don't you get a guitar?

if you want a less "flat" tone I'd suggest getting a set of D'Addario EXL-170s. is there anything in particular you wanted to know about differences between strings?
1978 Peavey T-40 -> Ampeg Micro-VR - > Ampeg SVT210AV + Ampeg SVT-15E
Try some piccolo bass strings. They're in teh same octave as a guitar but you keep the string spacing of a bass.
CHeaper than bass strings.

Not sure how much setup you may have to do to get them to work. They're next on my list of things to try...if the 5 string bass i'm looking at tomorrow is good then these are my next buy.

In between is a tenor bass.