This Neck has been planed and sanded to allow for a Mirrored Acrylic fingerboard which has been bonded to the neck with a recommended Sealant (very strong) but i would imagine easier to remove than glue. I didn't just want to remove the frets and sand but be a little adventurous. There's a little Back-Bow after removing the strings which ive left. If you fancy playing around with a fretless neck and have a 112 then this might spark your curiosity. I will also include a piece of Brass bar if you fancy making a Nut yourself, and the back plate and neck screws. ps: its only paint on the headstock.

Had this on ebay but no interest.

my member name is : novakro0204

Only want £20 + postage

Contact Dave - 01223887196

Buyer collects or Paypal.
2.jpeg (Mobile).JPG
1.jpeg (Mobile).JPG