#1
So I have a Focusrite Scarlett 8i6 and basically what I'm trying to do is get my signal to go through the interface, into the computer, and out the computer speakers. Anyone know if that's possible/how to do it?
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?
#2
You have three options really:
1. The Proper Way: Plug your speakers into the 8i6, use that as your primary sound card.
2. The Questionable-But-Still-Proper Way: Instead of ASIO use WASAPI, select exclusive mode and choose the 8i6 as input and speakers as output
3. The Dodgy Way: Use ASIO4ALL to select the 8i6 as the input and the speakers as output. Note that for ASIO to be able to use a device no other applications can be using it so it almost definitely can't be the default device for your system.
#3
Quote by chatterbox272
You have three options really:
1. The Proper Way: Plug your speakers into the 8i6, use that as your primary sound card.


This. You should have your monitors plugged into the interface and set your DAW accordingly so that monitoring comes out the speakers.