#1
1995 MIM strat.

which one would i need? it sounds stupid i know, but...

where do i measure? sixth to first string saddles (using the center of saddles) or the whole distance between the outer sixth and first saddles.

2 3/32nd's from string to string

2 5/8" from outer edge to outer edge.

which ones do i need?

_____________


i am swapping due to wear on multiple saddle burrs. i want to have the factory ones, as i want to be able to go back and change it to stock. it was a gift from a good friend and he asked me to keep it as it is. i respect that.
#2
String width is the measurement from outer string to outer string. 2 5/8" is closer to a 7 string spacing.

I believe(but you should double check) that Fender spacings are 2 1/8" and 2 3/16". And the smaller size is used on imports.
#3
Quote by W4RP1G
String width is the measurement from outer string to outer string. 2 5/8" is closer to a 7 string spacing.

I believe(but you should double check) that Fender spacings are 2 1/8" and 2 3/16". And the smaller size is used on imports.


this is what i should need, correct? 2 1/16" spacing is closer, than the other size. its hard for me to get a good measurement. i shake horribly.

http://www.musiciansfriend.com/accessories/graph-tech-string-saver-originals-strat-tele-2-1-16-spacing

:cheer:
#4
I know the 2 1/16" fit my Squier.

Quote by emad
jthm_guitarist
Warned for trolling!


Quote by metal4eva_22
Didn't you say that you had a stuffed fox that you would occasionally fuck?

Quote by Axelfox
It's not a fox,it's a wolf.
#5
Quote by trashedlostfdup
this is what i should need, correct? 2 1/16" spacing is closer, than the other size. its hard for me to get a good measurement. i shake horribly.

http://www.musiciansfriend.com/accessories/graph-tech-string-saver-originals-strat-tele-2-1-16-spacing

:cheer:

Those are probably them. I believe that is the standard import spacing(not 2 1/8" like I said before).