#1
I installed a Dragonfire Screamer and two Fender Hot Noiseless SC's in my Ibanez. It uses a regular 8-lug switch. I knicked the insulation a couple times while soldering and burnt it. Now the 2 3 and 4 positions are completely silent. I'm 99% sure it's just the wire because playing with the wire that goes from the pup to the switch can get it to work momentarily. How easy is it to change the wire and is it possible it's something else? I wouldn't have thought the 2 and 4 positions would be silent since the other 2 pups are working fine, so that's why I'm not completely sure.
RG351DX - Bridge Dragonfire Screamer, Mid+Neck Fender Hot Noiseless
Peavey Valveking 112 - Eminence GB128
AMT E1 > Joyo AC Tone > Dan'o EQ > Shimverb > Digidelay
#2
It's the typical rubber insulation right? Minor knicks and burns shouldn't damage the wires, are you sure you didn't accidentally ground something?

Pictures would help.
Quote by Blompcube
it's so cool to hate Gibson, even the federal Department of Justice hates them.

( )( )
( . .) This is Bunny. Copy and paste Bunny into your
C('')('') signature to help him gain world domination.
#3
RG351DX - Bridge Dragonfire Screamer, Mid+Neck Fender Hot Noiseless
Peavey Valveking 112 - Eminence GB128
AMT E1 > Joyo AC Tone > Dan'o EQ > Shimverb > Digidelay
#4
I would suggest starting from scratch

Thats some pretty rough wiring! I'd bet its a bad connection somewhere in there. If that still doesnt work for you it could be the wire braiding. Trim away the insulation where you burnt it and try and roll the wire back together, shrinkwrap/tape it back up for a quick fix.
#5
Quote by tas38

Good Job Westen, really amazing job. couldn't get much better

I say either try again, or take it to a professional.
My Name is Cameron.
Quote by Cathbard
For me, bedroom levels is a cranked plexi half stack.

Now get off my ****ing lawn.


#6
I'm fairly certain that your soldering efforts have grounded the middle pickup. Honestly it's really quite rough. Try again.

Or like the others have mentioned, time to see a tech to get it soldered.
Quote by Blompcube
it's so cool to hate Gibson, even the federal Department of Justice hates them.

( )( )
( . .) This is Bunny. Copy and paste Bunny into your
C('')('') signature to help him gain world domination.