#2
Behind the jack area under the footplate is a micro taper switch which provides the user two distinct volume swell rates.

Googled that.
Quote by SimplyBen
That's the advantage of being such a distance from Yianni. I can continue to live my life without fear of stumbling upon his dark terror.


Quote by Toppscore
NakedInTheRain aka "Naked with shriveled pencil sized bacon In The Rain"
#3
If yours has the switch, you can replace the switch with a trimmer and lower the resistor down to 1K.
If yours doesn't have the switch or trimmer, you can add a 1K resistor and a trimmer in series. Hook this trimmer/resistor between the in and out jack tips.
Trimmer value should probably be the same value as the volume pedals pot.