#1
Hey all you guitar wiring masters,

I'm going to rewire my Schecter Tempest Classic from a 2 vol, 2 tone, 2 p/p coil splits, to 2 vol, 1 tone treble roll off, 1 tone bass roll off, 2 p/p coil splits, 1 p/p out of phase, and 1 p/p series/parralel (Jimmy Page Wiring).

I made up a drawing base on 3 wiring schematics - one for the Jimmy Page wiring from Seymour Duncan ( http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=jp_style ), one for changing the setup from a 2 tone to a master tone, from seymour duncan again ( http://cdn.seymourduncan.com/pdfs/support/schematics/2h_2v_1t_3w.pdf ), and one for the G&L PTB from guitars by Leo forum (http://guitarsbyleo.com/FORUM/viewtopic.php?f=36&t=2628).

Here is my drawing
https://copy.com/oOgvkYsVqzTY
and Here is pretty much all the resources I used for it https://copy.com/GXMytE6lBrWc
(EDIT: added a wiring diagram with an Half out of phase wiring instead of the out of phase)

I was wondering if I got it right, and if I did get it right, let anyone who wants to try the wiring have a ready drawing.

Thanks,

Tom
Last edited by tom_o at Jun 11, 2013,