#2
Looks like it's homemade to me.
RG351DX - Bridge Dragonfire Screamer, Mid+Neck Fender Hot Noiseless
Peavey Valveking 112 - Eminence GB128
AMT E1 > Joyo AC Tone > Dan'o EQ > Shimverb > Digidelay
#3
It looks like it may have been a combo at one point.
Quote by CodChick


Seriously, I'm not a fan of iphones and guitars mixing.
#4
I'd say it's a diy cab.
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#6
It is not worth $200 at all, offer him $150
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#7
Yeah I figured it was a DIY piece. I wouldnt pay 220 for it haha. If I dO decide to check out, what type of things can I look for to determine the quality?
#9
Quote by 667
Those speakers go for around $50-$60 bucks used. So $150 for the cab isn't that bad.
The wood looks good.

those 70/80's go for $39 new at Avatar Speakers

Put your hands firmly on the top 2 corners and push side to side. This will make sure all the corners are joined good. Since it is open-back look at the internal bracing.
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#10
Quote by Robbgnarly
those 70/80's go for $39 new at Avatar Speakers

Put your hands firmly on the top 2 corners and push side to side. This will make sure all the corners are joined good. Since it is open-back look at the internal bracing.



That's a good price. They prolly make up the $$$ in the cab.