#1
Hey guys I am having a problem hooking up my DMZ EVO2 Bridge pickup into my Ibanez S series that has an HSH setup. I am going to be very detailed.

After following the wiring instructions, the EVO2 is audible but when I use the 5 way pickup selector in the bridge position for some reason the middle pickup is on. I could take the easy way out and just un-solder the mid pickup but I want this guitar to be fully functional.
#2
Sounds like you've soldered the pickup to the wrong lug. Check your wiring diagrams and make sure you're looking at the correct one for your style of 5-way switch. There are a few different types so you've probably just soldered onto the wrong lug.
"Air created the greenness. And once you've got something, that leads to otherness." - Karl Pilkington.