#1
Hi,


I have a Ditto and I want to remove the knob and install one that's round so I can, with my foot, roll off the volume easier. However, it isn't as obvious to me how to remove them as it's been with other pedals. Does anyone know if it's just simply pull them off like ordinary or they use some different system (them Danes...)

Guitars:
- Gibson SG Standard
- Lag Roxane 500
- Eastwood Hi-Flyer
- Takamine EG523

Amplifiers:
- Jet City JCA50H
- George Dennis 60Watt The Blue Combo
- Marshall SuperBass 100Watt
#2
From my experience you can pull them off with the right amount of force if there is no allen key screw. If there's a screw there, you'll need to undo that first. I doubt you'll break the potentiometer if you try too hard to pull the knob off, so I'd just go for it.
"Air created the greenness. And once you've got something, that leads to otherness." - Karl Pilkington.
#3
Thanks, I'll go try now.
Guitars:
- Gibson SG Standard
- Lag Roxane 500
- Eastwood Hi-Flyer
- Takamine EG523

Amplifiers:
- Jet City JCA50H
- George Dennis 60Watt The Blue Combo
- Marshall SuperBass 100Watt
#4
I just use a butterknife and those suckers just pop right off usually. Like Lavatain said, check if the knob is secured on by a screw. Can't remember if TC did that with their knobs or not.