Can someone please link me to a decent diagram of the wiring of two humbuckers. I want to coil tap the neck peck up but not the bridge pickup. Thankyou
www.guitarelectronics.com should have something for you
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
seymour duncan should have one
Quote by JackWhiteIsButts
I saw Pantera live once, Dime changed into a body bag right there on stage.

Another question, what is the difference between series/parallel wiring and standard coil split wiring
Coil splitting grounds out one of the coils so that only one coil is operating. This gives a brighter tone somewhat similar to a single coil pickup and negates the hum cancelling properties of the pickup.

Series/parallel switching puts the coils in series or parallel. Humbuckers coils are wired in series as a standard. This gives them their higher output. Wiring them in parallel reduces output to a level near a regular single coil but retains the hum cancelling properties.