#1
hey guys, so basically the subject question. I thought it was the dc resistance, but I was looking at the tesla plasma fh-1, its only 7.5 I think but it says output medium-high. im not sure how that would be medium to high, am I looking at this wrong?
#2
Depends on what gauge wire it is wound with and the type and strength of magnet matters too. All those things being equal then dc resistance is a good indication of how much wire is on there and hence how high of an output - but ONLY with those other things being equal.
Gilchrist custom
Yamaha SBG500
Telecasters
Randall RM100 & RM20
Marshall JTM45 clone
Marshall JCM900 4102 (modded)
Marshall 18W clone
Fender 5F1 Champ clone
Atomic Amplifire
Marshall 1960A
Boss GT-100


Cathbard Amplification
My band
#4
Looks like it would be fairly high output but not super high. It has ceramic magnets and large pole pieces so I would guess that it is quite a bit hotter than the DC resistance suggests. I have never tried their pickups so I am only taking an educated guess though.
Gilchrist custom
Yamaha SBG500
Telecasters
Randall RM100 & RM20
Marshall JTM45 clone
Marshall JCM900 4102 (modded)
Marshall 18W clone
Fender 5F1 Champ clone
Atomic Amplifire
Marshall 1960A
Boss GT-100


Cathbard Amplification
My band
#6
by DC resistance alone its fairly low by modern standard. but as cath stated there are other factors.

its not uncommon to see most modern hum buckers over 10K dc resistance.
Carvin CT624
Walden G630ce Acoustic
Carvin V3M, Avatar 2x12 WGS Reaper, vet 30
(crybaby, Fairfield circuitry Comp, GFS tuner, Vick Audio 73 Ram's Head, Xotic AC booster, lovepedal trem, TC Flashback, PGS Trinity Reverb, Walrus Audio Aetos power)
#7
well then what do you think? bad idea? I mean im a little skeptical, its sounds great in all the clips I hear, but I don't want to get it and have it be a little b****