#1
Hi guys,

I'm looking to replace the bridge (and nut) on both my Les Paul Tribute and Studio. I am looking into the Graph Tech "Supercharger" kits, which seem to be good value for the money.

I am, however, somewhat confused about the term "post spacing" that seems to turn up with these products, which seems to differ among the sets. What do I need to measure to know the post spacing? And furthermore, which set doe I need?

http://www.thomann.de/nl/graph_tech_supercharger_kit_resomax_6mm.htm

http://www.thomann.de/nl/graph_tech_supercharger_kit_resomax_4mm.htm

Thanks UG!
Gibson Les Paul Studio
Gibson Les Paul Tribute 50's
Gibson Midtown Custom
Fender Telecaster Deluxe
Fender Telecaster Standard
Gretsch Corvette
Danelectro DC59


Crybaby | TS9 | Korg | Little Big Muff | PS-6| MXR Chorus | TC Spark| DL4
#2
Measure the length of the space between the center of your two bridge posts.
Spin 'round carousel when your horse isn't screwed in.

My band:
Fractured Instinct
(For fans of Death/Groove/Prog Metal)

Ibanez RGA42E
Ibanez S420
LTD H-301
Ibanez RG520
Peavey Predator USA
Douglas Grendel 725
Line 6 Pod HD500X
#3
So it's just the width of the post, am I right? Is the standard Gibson with 4mm?
Gibson Les Paul Studio
Gibson Les Paul Tribute 50's
Gibson Midtown Custom
Fender Telecaster Deluxe
Fender Telecaster Standard
Gretsch Corvette
Danelectro DC59


Crybaby | TS9 | Korg | Little Big Muff | PS-6| MXR Chorus | TC Spark| DL4
#4
No wait, I'm wrong. The post spacing can't possibly be that small of a distance, I don't know what I was thinking.

Most likely it is the width of the actual mounting holes for the posts.
Spin 'round carousel when your horse isn't screwed in.

My band:
Fractured Instinct
(For fans of Death/Groove/Prog Metal)

Ibanez RGA42E
Ibanez S420
LTD H-301
Ibanez RG520
Peavey Predator USA
Douglas Grendel 725
Line 6 Pod HD500X