#1
Hi Guys,

I recently acquired an older EMG dg20 loaded plate for my strat. All the pickups, pots, switch are connected but there are 3 wires that are open ended, a black wire coming from the battery connector, the other wire is red and already connected. From the top of the printed circuit there are, from left to right a white wire which is connected, a black wire which is connected, both to volume by solder, next there is another black wire and this one is not connected just left stripped at the end, next there is a green wire which is not connected again just left stripped at end, last is a red wire which is connected. There is no jack plug input supplied with this plate, do these wires connect to it?? And if so, in what order?

Thanks in advance