#1
Hey guys I'm thinking about swapping some pickups in my guitar and changing some of the pots and stuff like that.

This may seem like a dumb question, but where do you get the wiring for all of this? Do you just use the wiring that comes off the pickups themselves, or is there a place to get extra wiring? (For say the Tone pot to the Output jack)

Thanks
-Zac
#5
Alright Thanks! one more question... any advice on what solder to use? I have some radio shack solder but i don't know if it's good for audio
#7
Quote by xDaFormer
Alright Thanks! one more question... any advice on what solder to use? I have some radio shack solder but i don't know if it's good for audio


60/40 rosin core. Make sure you're using a pencil/iron and not a gun. Around 25w is good.
I'M IN THE FIGHT TO CURE CYSTIC FIBROSIS...MY LIFE DEPENDS ON IT!


Quote by JustRooster
I'm a straight man, but I'd put that surfcaster right in my mouth.



Quote by JD2k9
Well, life is like a penis.
Women make it hard.
Also, it's short but seems long when it gets hard.