#1
Yo guys, been a while since I was last here :P
Anyway, I'm going to repair my old Danelectro CF-1 as the fuzz pot crackled and the volume is greatly reduced.
I've already ordered a new A10K pot for the fuzz issue but I don't know how to solve the volume problem. Any ideas?
Quote by treborillusion
Low end Epiphone = fire wood.

LTD Surveyor 4
Kramer Imperial
Engl Gigmaster E315
Marshall 1936 JCM900 lead cab
My website
#3
Quote by Invader Jim
Can you be more specific?

Well the fuzz sounds fine but you have to do some serious fidgeting with the knobs to make it sound fine otherwise the volume is much lower than the amp's volume when the pedal is off. I've figured out that it's the fidgety-ness of the cheap pots on the pedal that's the problem and I've ordered an A10k pot but can't find any B100ks for the volume.
EDIT:
Never mind, found one but the problem now is detaching the main board as there are these white blocks attached to cables, linking it all but I can't seem to unplug them. Any ideas? They're the ones circled in the photo below.
Quote by treborillusion
Low end Epiphone = fire wood.

LTD Surveyor 4
Kramer Imperial
Engl Gigmaster E315
Marshall 1936 JCM900 lead cab
My website
Last edited by Boonnoo666 at Mar 2, 2014,