#1
Hello all,
I have an affinity telecaster and wish to change the pickups, I have read that most bridge pickups won't fit in the bridge route, is there any bridge that will fit/cover up the old holes from the affinity bridge? Also is it worth having it converted to string through and/or 3 brass saddles?
Thankyou!
#2
you can make the route larger with a hammer and a chisel

if you want to make it string thru or brass saddles look here good stuff and really cheap prices www.guitarfetish.com
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#4
string-thru will give better sustain.

If you make it string-thru you will need a set of string ferrules
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
#5
Ok, will remember that, affinity bridges are differen't sized from fenders, what bridge would be closest to the size and string spacing?
#6
Quote by MutantWombat
Ok, will remember that, affinity bridges are differen't sized from fenders, what bridge would be closest to the size and string spacing?

That I don't know, I'm not familiar with your guitar
They do have the spec's of the bridges on the site. I suggest you measure yours and see what is a match.

The modern style bridges are the easiest to get intonated (I prefer them also)
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate